We provide our clients with an extensive range of Industrial Steel Plates that are available in various dimensions. These products are manufactured using quality approved steel and advanced machines at our vendors unit. Our steel items are demanded in various industries to cater to the variegated applications needs of the clients.
Stainless Steel Plate
Our clients can avail from us a comprehensive range of Stainless SteelPlates that are manufactured in line with the prevailing industry standards. These plates can be availed in different grades like austenitic, duplex, martensitic and ferritic. Furthermore, the stainless steel plates offered by us can be provided in 3 mm to 100 mm thickness and 1000 mm to 3200 mm width. The length of these plates can be custom-made in 2438 mm/3048 mm/6096 mm and 13500 mm.
Features:
- Grades: Austenitic, Duplex, Martensitic, Ferritic
- Surface: No.1 Finished
- Thickness: 3 mm to 100 mm
- Width: 1000 mm to 3200mm
- Length: 2438 mm / 3048 mm / 6096 mm to 13500 mm
- All Grades : Austenitic, Duplex, Martensitic, Ferritic
- Special grades : 310S, 309S, 317L, 904L, Duplex 2005, 230
- Stainless Steel Plates Prime Materials - ASTM A240/ASME SA 240, NACE MR 01 - 75, EN 10204 3.1
- Coil, Sheet and plate dimension (in mm)
Specifications:
Type
|
Thickness |
Width Sheet, Plate |
Length Sheet, Plate |
Width Coil, Strip |
Quarto Plate |
2.0 - 110.0 |
1000 - 3200 |
3000 - 13500 |
|
Hot Rolled |
2.40 - 12.7 |
300 - 2050 |
400 - 13900 |
35 - 2050 |
Semi-cold Rolled |
1.36 - 6.35 |
300 - 1592 |
1000 - 13900 |
36 - 1592 |
Cold Rolled |
0.03 - 6.35 |
100 - 2050 |
240 - 13900 |
4.92 - 2050 |
Wear and Abrasion Resistant Steel Plate
 Our organization offers its clients with an extensive range of Wear and Abrasion Resistant Steel Plates. We sell wear plates according to its hardness measured on the Brine Hardness Test – usually in 400 HB and 500 HB grades. If your specification is to the Rockwell Test we can also advise. Steels with a high HB rating (Brinell Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant.
400 HB steel is over 3 times harder than mild steel (120 HB), but only a third as hard as stainless steel (1250 HB). Example uses are for construction machinery, skips, bulldozers and excavators, buckets and conveyors. The steel is quenched which provides wear resistance; in order to improve hardness it may also be tempered. Lower HB’s generally provide good cold bending properties and good weld-ability. Weld-ability is not generally reduced as the hardness increases.
Wear resistant steels are not appropriate for use at temperatures over 250°C as the heat can cause changes to the material properties. Testing is undertaken by firing 10 mm steel or tungsten carbide ball at 29 kN and the size of the resulting indentation is measured. Tests are carried out according to EN ISO 6506 or ASTM E10. The figures below are representative of 15 mm thick 400 HB and 500 HB plates.
Specification:
- Products No: RK-100
- Size: 1400*2800mm
- Materials: Q235
- Hardness: HRC 57-62
Technical Specifications:
Type
|
C Max |
Si Max |
Mn Max |
P Max |
S Max |
Cr Max |
400 HB |
0.15% |
0.70% |
1.60% |
0.225% |
0.01% |
0.50% |
500 HB |
0.29% |
0.70% |
1.60% |
0.025% |
0.01% |
1.00% |
Technical Specifications:
|
Type |
Ni Max |
Mo Max |
B Max |
CEV |
CET |
400 HB |
0.25% |
0.25% |
0.004% |
0.37% |
0.27% |
500 HB |
0.50% |
0.30% |
0.004% |
0.62% |
0.41% |
Shipbuilding Plate
 Our range of Shipbuilding Plates are manufactured in accordance to the guidelines of ASTM A131 standards. The A131 covers various grades like ordinary strength A, B, CS & E and higher strength AH, DH, EH & FH. We also provide these plates in AH36, DH36 and EH36 grades that are chemically similar but tested on different temperatures for the Charpy V–Notch test. Furthermore, our range is used for manufacturing containers, bulk cargo vessels, cruise ships, ferries and yachts.
The standard composition is as below for AH36, DH36 and EH36:
AH36:
- Thickness: 5-150mm
- Width: 1500, 2000, 20555 and 3000 mm
- Length: up to 12000 mm
DH36:
- Thickness: 5-150 mm
- Width: 1500, 2000, 20555 and 3000 mm
- Length: up to 12000 mm
EH36:
- Thickness: 5-150mm
- Width: 1500, 2000, 20555 and 3000 mm
- Length: up to 12000 mm
Specifications:
Element |
% Composition |
C |
0.18 |
Mn |
0.90 – 1.60 |
Si |
0.1 – 0.5 |
P |
0.04 |
S |
0.04 |
Al |
0.02 |
Nb |
0.02 – 0.05 |
V |
0.05 – 0.1 |
Ti |
0.02 |
Cu |
0.35 |
Cr |
0.2 |
Ni |
0.4 |
Mo |
0.08 |
Maximum carbon equivalent values are 0.38 for plates less than 50mm thick and 0.4 for plates between 50mm and 100mm thick.
Technical Specification:
Types |
AH36 |
DH36 |
EH36 |
Tensile Strength (ksi) |
71 – 90 |
71 – 90 |
71 – 90 |
Tensile Strength (MPa) |
490 – 620 |
490 – 620 |
490 – 620 |
Yield Point (ksi) |
51 |
51 |
51 |
Yield Point (MPa) |
355 |
355 |
355 |
Elongation in 200mm (%) |
19 |
19 |
19 |
Elongation in 50mm (%) |
22 |
22 |
22 |
Charpy V-Notch Test Temperature |
0°C |
-20°C |
-40°C |
High Tensile Plates
We provide our clients with an extensive range of High Tensile Plates that are manufactured with the use of high grade of sheet metal. Our engineers also make use of stainless steel and other base material to manufacture these high tensile plates. Furthermore, available in various sizes, shapes and dimensions, these plates are used in various metal working. These plates also find application in heavy load equipment like overhead cranes as well as in civil engineering goods also.
Specification:
- Width: 1000-1800,thickness: 2.0-50 mm
- Length: 2000-12000 mm
- Thickness: 2.0-50 mm
- Special Use: High-strength Steel Plate
Steel Plates
 We offer high grade Steel Plates at affordable price. These plates are manufactured using finest grade raw material available to ensure international quality. These steel plates are available in different shape size and thickness according to the needs of our customer. Owing to highly experienced group of qualified professional and use of latest technology machinery, these steel plates are corrosion resistance, having high tensile strength and longer durability.
Features:
- Corrosion resistance
- High tensile strength
- Durability
Specification:
- Thickness: 4-400 mm
- Width: 1000-4200 mm
- Length: 6000-12000 mm
- Certification: ISO AND BV
|
|
|
